Dreame Robot vacuum Dreame D10 Plus The dust collection bag is full (base error)
What this problem usually means
The auto-empty base reports that its dust collection bag is full and emptying performance suffers.
Likely causes
- The dust collection bag is full
- The dust intake or air duct at the bottom of the base is blocked
How to fix it — step by step
- Replace the dust collection bag with a new one (Dreame recommends replacing the bag every 4–6 weeks) → Shop the dust collection bag at Amazon
- If the bag is not the problem, check whether the dust intake or air duct at the bottom of the base is blocked and remove any blockage before use
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Dust collection bag.
Parts that commonly fix it
- Dust collection bag - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame D10 Plus problems
- The upper cover of the base fails to be closed
- Base station error (blinking orange indicator on the auto-empty base)
- No water comes out of the mopping module, or only a little bit comes out
- Robot cannot connect to Wi-Fi
- Robot cannot recharge
- Robot cannot return to the base
- Robot does not perform scheduled cleaning
- Robot does not turn on
- Robot doesn't resume cleaning after charging
- Robot is making a strange noise
- Robot is malfunctioning
- Robot no longer cleans efficiently or leaves dust behind