Dreame Robot vacuum Dreame D10 Plus Base station error (blinking orange indicator on the auto-empty base)

What this problem usually means

The auto-empty base shows a blinking orange error light. The manual lists the checks for this state in its status-indicator table.

Likely causes

  1. No dust collection bag installed, or the bag is not installed in place
  2. The upper cover of the base is not closed tightly
  3. The dust collection bag is full
  4. Debris around the dust intake of the robot and base
  5. Foreign objects inside the base (check with the power cord unplugged)
  6. The dust bin of the robot is not installed

How to fix it — step by step

  1. Check whether a dust collection bag is installed; if not, install one, and check it is installed in place → Shop the dust collection bag at Amazon
  2. Check whether the upper cover is closed; if not, close it tightly
  3. Check whether the bag is full; if so, replace it
  4. Remove debris around the dust intake of the robot and base
  5. Unplug the power cord of the base and check whether there are any foreign objects inside
  6. Check whether the dust bin of the robot is installed
  7. For other errors, contact qualified technicians or after-sales service

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Dreame Robot vacuum Dreame D10 Plus problems

See all Dreame Dreame D10 Plus codes & guides →