Dreame Robot vacuum Dreame D10 Plus No water comes out of the mopping module, or only a little bit comes out
What this problem usually means
Little or no water is dispensed while mopping.
Likely causes
- No water inside the water tank
- Dirty mop pad
- Mop pad is not installed correctly
- The blowhole on top of the water tank is blocked
How to fix it — step by step
- Check whether there is water inside the water tank and refill if needed
- Clean the mop if it becomes dirty
- Make sure the mop pad is installed correctly according to the user manual → Shop the mop pad at Amazon
- Clean the blowhole on the top of the water tank
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Mop pad.
Parts that commonly fix it
- Mop pad - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame D10 Plus problems
- Robot cannot connect to Wi-Fi
- Robot cannot recharge
- Robot cannot return to the base
- Robot does not perform scheduled cleaning
- Robot does not turn on
- Robot doesn't resume cleaning after charging
- Robot is making a strange noise
- Robot is malfunctioning
- Robot no longer cleans efficiently or leaves dust behind
- Robot returns to the base station without performing auto-empty tasks
- The auto-empty duration is unacceptably long sometimes
- The dust collection bag is full (base error)