Dreame Robot vacuum Dreame D10 Plus Robot no longer cleans efficiently or leaves dust behind
What this problem usually means
Cleaning results have deteriorated and dust is left on the floor.
Likely causes
- The dust bin is full
- The filter is blocked
- A foreign object is caught in the main brush
How to fix it — step by step
- Clean the dust bin and the dust intake
- Clean the blocked filter → Shop the filter at Amazon
- Clean the main brush to remove the foreign object
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Filter.
Parts that commonly fix it
- Filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame D10 Plus problems
- Robot returns to the base station without performing auto-empty tasks
- The auto-empty duration is unacceptably long sometimes
- The dust collection bag is full (base error)
- The upper cover of the base fails to be closed
- Base station error (blinking orange indicator on the auto-empty base)
- No water comes out of the mopping module, or only a little bit comes out
- Robot cannot connect to Wi-Fi
- Robot cannot recharge
- Robot cannot return to the base
- Robot does not perform scheduled cleaning
- Robot does not turn on
- Robot doesn't resume cleaning after charging