Dreame Robot vacuum Dreame D10 Plus Robot cannot recharge
What this problem usually means
The robot is on the auto-empty base but does not recharge.
Likely causes
- The base is not receiving power (power cord not plugged in correctly)
- Poor contact at the charging contacts of the base and robot
How to fix it — step by step
- Confirm that both ends of the power cord are plugged in correctly
- Clean the charging contacts of the base and robot
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame D10 Plus problems
- Robot cannot return to the base
- Robot does not perform scheduled cleaning
- Robot does not turn on
- Robot doesn't resume cleaning after charging
- Robot is making a strange noise
- Robot is malfunctioning
- Robot no longer cleans efficiently or leaves dust behind
- Robot returns to the base station without performing auto-empty tasks
- The auto-empty duration is unacceptably long sometimes
- The dust collection bag is full (base error)
- The upper cover of the base fails to be closed
- Base station error (blinking orange indicator on the auto-empty base)