Dreame Robot vacuum Dreame D10 Plus Robot does not turn on
What this problem usually means
The robot does not power on.
Likely causes
- Battery level is low
- Ambient temperature is too low (below 0°C) or too high (above 40°C); operating temperature is 0°C to 40°C
How to fix it — step by step
- Recharge the robot on the base, then try again
- Use the robot within its 0°C to 40°C operating temperature
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame D10 Plus problems
- Robot doesn't resume cleaning after charging
- Robot is making a strange noise
- Robot is malfunctioning
- Robot no longer cleans efficiently or leaves dust behind
- Robot returns to the base station without performing auto-empty tasks
- The auto-empty duration is unacceptably long sometimes
- The dust collection bag is full (base error)
- The upper cover of the base fails to be closed
- Base station error (blinking orange indicator on the auto-empty base)
- No water comes out of the mopping module, or only a little bit comes out
- Robot cannot connect to Wi-Fi
- Robot cannot recharge