Dreame Robot vacuum Dreame D10 Plus Robot is malfunctioning
What this problem usually means
The robot behaves abnormally or stops working correctly.
Likely causes
- A temporary robot fault
How to fix it — step by step
- Turn off the robot and then reactivate it
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame D10 Plus problems
- Robot no longer cleans efficiently or leaves dust behind
- Robot returns to the base station without performing auto-empty tasks
- The auto-empty duration is unacceptably long sometimes
- The dust collection bag is full (base error)
- The upper cover of the base fails to be closed
- Base station error (blinking orange indicator on the auto-empty base)
- No water comes out of the mopping module, or only a little bit comes out
- Robot cannot connect to Wi-Fi
- Robot cannot recharge
- Robot cannot return to the base
- Robot does not perform scheduled cleaning
- Robot does not turn on