Dreame Robot vacuum Dreame D10 Plus Robot cannot connect to Wi-Fi
What this problem usually means
The robot cannot join Wi-Fi in the Mi Home / Xiaomi Home app.
Likely causes
- Something is wrong with the Wi-Fi connection
- Location permission is not open in the app
- Wi-Fi signal is weak
- A 5GHz Wi-Fi network was used (not supported)
- The username or password of Wi-Fi is incorrect
How to fix it — step by step
- Reset the Wi-Fi and download the latest version of the Mi Home / Xiaomi Home app, then try reconnecting
- Ensure the location permission on the app is enabled
- Make sure the robot is in an area with good Wi-Fi coverage
- Connect the robot to 2.4GHz Wi-Fi
- Enter the correct username and password for the Wi-Fi network
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame D10 Plus problems
- Robot cannot recharge
- Robot cannot return to the base
- Robot does not perform scheduled cleaning
- Robot does not turn on
- Robot doesn't resume cleaning after charging
- Robot is making a strange noise
- Robot is malfunctioning
- Robot no longer cleans efficiently or leaves dust behind
- Robot returns to the base station without performing auto-empty tasks
- The auto-empty duration is unacceptably long sometimes
- The dust collection bag is full (base error)
- The upper cover of the base fails to be closed