Whirlpool Oven 4-digit F/E-code models (PartSelect chart) F6 E1 Error Code
What the F6 E1 code means
Over-temperature: Whirlpool sources list F6 E1 as oven over-temperature when heating / over-temperature in Cook, set when the oven reaches about 600F outside self-clean.
Likely causes
- Welded heating relay on the control board → Shop the control board at RepairClinic
- Drifted oven temperature sensor → Shop the oven temperature sensor at RepairClinic
- Failed control board temperature circuit
How to fix it — step by step
- Press Cancel, switch the breaker off, and let the oven cool completely
- Do not use the oven or self-clean until it has been checked
- Schedule service for sensor and relay testing
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the oven temperature sensor.
Shop the oven temperature sensor at RepairClinic or Amazon
Also tied to this fault: control board - Shop at RepairClinic or Amazon
Parts that commonly fix the F6 E1 code
- oven temperature sensor - Shop at RepairClinic or Amazon
- control board - Shop at RepairClinic or Amazon
Before you buy: check the oven temperature sensor first
Test: Unplug the range and measure the oven temperature sensor's resistance at the sensor connector or the control check points in the tech sheet.
A good one reads: 1080 Ω at 21°C / 70°F, rising to 1654 Ω at 177°C / 350°F — add about 2 Ω per 1°F above room temperature (Whirlpool tech sheet 8303103 / W10201489A). If the resistance is not valid, replace the sensor.
Test values from forum.appliancepartspros.com documentation - confirm against your model's own tech sheet.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.
Related Whirlpool Oven 4-digit F/E-code models (PartSelect chart) error codes
See all Whirlpool 4-digit F/E-code models (PartSelect chart) codes & guides →