Whirlpool Oven 4-digit F/E-code models (PartSelect chart) F3 E1 Error Code

What the F3 E1 code means

An oven temperature sensor fault in the F3 E family: PartSelect groups all F3 E-codes as an oven temperature sensor (RTD) or warming drawer defect, and technician tables describe F3 E1 as the shorted-sensor companion to F3 E0's open sensor.

Likely causes

  1. Shorted oven temperature sensor → Shop the oven temperature sensor at RepairClinic
  2. Pinched sensor harness
  3. Failed warming drawer sensor on models with a warming drawer

How to fix it — step by step

  1. Switch the breaker off for 1 minute, restore it, and try Bake
  2. If the code returns, schedule service to test the sensor resistance and harness

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F3 E1 code

Before you buy: check the oven temperature sensor first

Test: Unplug the range and measure the oven temperature sensor's resistance at the sensor connector or the control check points in the tech sheet.

A good one reads: 1080 Ω at 21°C / 70°F, rising to 1654 Ω at 177°C / 350°F — add about 2 Ω per 1°F above room temperature (Whirlpool tech sheet 8303103 / W10201489A). If the resistance is not valid, replace the sensor.

Test values from forum.appliancepartspros.com documentation - confirm against your model's own tech sheet.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Whirlpool Oven 4-digit F/E-code models (PartSelect chart) error codes

See all Whirlpool 4-digit F/E-code models (PartSelect chart) codes & guides →