Whirlpool Oven 4-digit F/E-code models (PartSelect chart) F3 E2 Error Code
What the F3 E2 code means
Oven temperature over 575F in Bake mode (too hot), in the older 4-digit tables.
Likely causes
- Oven overheating in Bake from a drifted sensor or welded relay (older platform)
- Warming drawer sensor open or shorted (current tech-sheet platform)
- Failed oven temperature sensor → Shop the oven temperature sensor at RepairClinic
How to fix it — step by step
- Press Cancel and let the oven cool completely; do not use self-clean
- Switch the breaker off for 1 minute and try a low Bake setting (skip this if your model lists F3 E2 as the warming drawer sensor and the oven itself is behaving)
- If the code returns, switch off at the breaker and schedule service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the oven temperature sensor.
Shop the oven temperature sensor at RepairClinic or Amazon
Also tied to this fault: control board - Shop at RepairClinic or Amazon
Parts that commonly fix the F3 E2 code
- oven temperature sensor - Shop at RepairClinic or Amazon
- control board - Shop at RepairClinic or Amazon
Before you buy: check the oven temperature sensor first
Test: Unplug the range and measure the oven temperature sensor's resistance at the sensor connector or the control check points in the tech sheet.
A good one reads: 1080 Ω at 21°C / 70°F, rising to 1654 Ω at 177°C / 350°F — add about 2 Ω per 1°F above room temperature (Whirlpool tech sheet 8303103 / W10201489A). If the resistance is not valid, replace the sensor.
Test values from forum.appliancepartspros.com documentation - confirm against your model's own tech sheet.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.
Related Whirlpool Oven 4-digit F/E-code models (PartSelect chart) error codes
See all Whirlpool 4-digit F/E-code models (PartSelect chart) codes & guides →