Whirlpool Oven 4-digit F/E-code models (PartSelect chart) F6 E0 Error Code

What the F6 E0 code means

Return line not connected: the control loses the switch pulse return line and shows the code within about 60 seconds of power-up. On combination microwave-oven models a similar F6 E0 can mean lost communication with the microwave control, so check your tech sheet.

Likely causes

  1. Failed control board
  2. Disconnected return line / ribbon connection
  3. Failed keypad / user interface on newer platforms

How to fix it — step by step

  1. Switch the breaker off for 1 minute and back on, then watch for a minute
  2. If the code returns at power-up, schedule service - PartSelect directs to replacing the control board → Shop the control board at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F6 E0 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Whirlpool Oven 4-digit F/E-code models (PartSelect chart) error codes

See all Whirlpool 4-digit F/E-code models (PartSelect chart) codes & guides →