Whirlpool Cabrio Steam Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 7 codes covered.
Shop Whirlpool Cabrio Steam parts at RepairClinic or Amazon
- F1 E1 — Motor relay stuck on the electronic control board: the control detects an internal motor relay failure, and the relay is part of the…
- F1 E3 — Control mismatch: the control console and electronic control board do not match, or the wrong control board was installed.
- F2 E1 — Stuck button: a button on the user interface control is stuck down.
- F3 E1 — Exhaust thermistor failure: the control detects a failed exhaust temperature sensor (open or shorted).
- F3 E2 — Moisture sensor failure: the control is not getting a proper signal from the moisture sensor bars inside the drum.
- F3 E3 — Inlet thermistor failure: the control detects a failed inlet temperature sensor.
- F4 E4 — Low line 2 voltage / voltage supply error: the L2 leg of the 240-volt power supply is missing.