Samsung Bespoke Jet Bot Combo Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 37 problems covered.
Shop Samsung Bespoke Jet Bot Combo parts at Amazon
- A leak was detected in the clean station, so the station can't wash the robot vacuum's Mop. If the error persists, contact Customer Service. — Clean Station message: a leak was detected in the Clean Station, so the station can't wash the Mop.
- Can't move in this no-go zone. Please move me somewhere else. — The Jet Bot Combo is inside a No-go Zone.
- Can't see anything. Please clean the front with a soft cloth. — Foreign material has accumulated on the Obstacle Sensor Window.
- Insert the washing space. — The Tub (washing space) is not inserted in the Clean Station.
- It's difficult to move. Please move me somewhere else. — The LED blinks red with this voice guide: the device is caught, stuck, or trapped while moving.
- Please attach the wastewater tank. — The Waste Water Tank is not inserted on the robot.
- Please check the battery connection by turning the power off, then back on. If you hear this message again after that, contact Customer Service. — Samsung lists this in the reset-then-service group: check the battery connection by power-cycling; if the message returns, contact the…
- Please check the left wheel to see if there's something stuck in it. — Foreign material is caught in the left driving wheel.
- Please check the right wheel to see if there's something stuck in it. — Foreign material is caught in the right driving wheel.
- Please insert the battery. If it's already inserted, then turn the power off and back on again to check the battery connection. If you hear this message again after that, contact Customer Service. — Samsung lists this in the reset-then-service group: the battery is not inserted, or its connection needs checking; if the message returns…
- Please insert the bin so cleaning can start. — The Dustbin is not inserted.
- Please remove the brush and take out whatever's stuck in there. — Foreign material is caught in the brush.
- Something is caught in the left Mop. — Foreign material is caught in the left Mop.
- Something is caught in the right Mop. — Foreign material is caught in the right Mop.
- Something's stuck in the side brush. Please remove it. — Foreign material is caught in the Spin brush (side brush).
- Something's wrong with the cliff sensor. Please clean the 4 small black windows underneath with a soft cloth. — Foreign material has accumulated on the Cliff Sensor.
- Something's wrong with the front bump sensors. Please open the cover and check. The bumper might be jammed, or there might be something stuck in there. — The Bumper Sensor needs to be checked.
- Something's wrong with the LiDAR bump sensor. The LiDAR cap might be jammed, or there might be something stuck in there. — The LiDAR bump sensor needs to be checked.
- Something's wrong with the main system. Turn the power off, then on again. If that doesn't fix it, contact Customer Service. — Samsung lists this in the reset-then-service group: try resetting the Jet Bot Combo; if the message returns, contact the Support Center for…
- The 3D sensor needs to be reset. Turn the power off, then on again. If that doesn't fix it, contact Customer Service. — Samsung lists this in the reset-then-service group: try resetting the Jet Bot Combo; if the message returns, contact the Support Center for…
- The AI processor isn't working properly. Turn the power off, then on again. If that doesn't fix it, contact Customer Service. — Samsung lists this in the reset-then-service group: try resetting the Jet Bot Combo; if the message returns, contact the Support Center for…
- The clean water tank of the clean station is empty, so the station can't wash the robot vacuum's Mop. Fill it up with water and start again. — Clean Station message (long form): the clean water tank is empty, so the station can't wash the Mop.
- The clean water tank of the clean station is empty, so the station can't wash the robot vacuum's Mop. Fill it up with water. — Clean Station message (short form): the clean water tank is empty.
- The LIDAR sensor needs to be reset. Turn the power off, then on again. If that doesn't fix it, contact Customer Service. — Samsung lists this in the reset-then-service group: try resetting the Jet Bot Combo; if the message returns, contact the Support Center for…
- The monitoring camera needs to be reset. Turn the power off, then on again. If that doesn't fix it, contact Customer Service. — Samsung lists this in the reset-then-service group: try resetting the Jet Bot Combo; if the message returns, contact the Support Center for…
- The object recognition sensor needs to be reset. Turn the power off, then on again. If that doesn't fix it, contact Customer Service. — Samsung lists this in the reset-then-service group: try resetting the Jet Bot Combo; if the message returns, contact the Support Center for…
- The washing space is full. — The Tub (washing space) is full.
- The washing space of the clean station is full, so the station can't wash the robot vacuum's Mop. Empty it. — Clean Station message (short form): the washing space is full.
- The washing space of the clean station is full, so the station can't wash the robot vacuum's Mop. Empty the washing space. — Clean Station message (long form): the washing space is full, so the station can't wash the Mop.
- The wastewater tank of the clean station is full, so the station can't wash the robot vacuum's Mop. Empty it and start again. — Clean Station message (long form): the wastewater tank is full, so the station can't wash the Mop.
- The wastewater tank of the clean station is full, so the station can't wash the robot vacuum's Mop. Empty it. — Clean Station message (short form): the wastewater tank is full.
- There's no clean water tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a clean water tank and start again. — Clean Station message (long form): no clean water tank is installed, so the station can't wash the Mop.
- There's no clean water tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a clean water tank. — Clean Station message (short form of the 'and start again' variant): no clean water tank is installed.
- There's no washing plate in the clean station, so the station can't wash the robot vacuum's Mop. Install it properly and start again. — Clean Station message (long form): no washing plate (Washboard) is installed, so the station can't wash the Mop.
- There's no washing plate in the clean station, so the station can't wash the robot vacuum's Mop. Install the plate properly. — Clean Station message (short form): no washing plate (Washboard) is installed.
- There's no wastewater tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a wastewater tank and start again. — Clean Station message (long form): no wastewater tank is installed, so the station can't wash the Mop.
- There's no wastewater tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a wastewater tank. — Clean Station message (short form): no wastewater tank is installed.