Samsung Robot vacuum Bespoke Jet Bot Combo There's no wastewater tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a wastewater tank.
What this problem usually means
Clean Station message (short form): no wastewater tank is installed.
Likely causes
- Waste Water Tank not installed in the Clean Station
How to fix it — step by step
- Insert the Waste Water Tank → Shop the waste water tank at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Waste water tank.
Parts that commonly fix it
- Waste water tank - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Samsung Robot vacuum Bespoke Jet Bot Combo problems
- A leak was detected in the clean station, so the station can't wash the robot vacuum's Mop. If the error persists, contact Customer Service.
- Can't move in this no-go zone. Please move me somewhere else.
- Can't see anything. Please clean the front with a soft cloth.
- Insert the washing space.
- It's difficult to move. Please move me somewhere else.
- Please attach the wastewater tank.
- Please check the battery connection by turning the power off, then back on. If you hear this message again after that, contact Customer Service.
- Please check the left wheel to see if there's something stuck in it.
- Please check the right wheel to see if there's something stuck in it.
- Please insert the battery. If it's already inserted, then turn the power off and back on again to check the battery connection. If you hear this message again after that, contact Customer Service.
- Please insert the bin so cleaning can start.
- Please remove the brush and take out whatever's stuck in there.