Samsung Robot vacuum Bespoke Jet Bot Combo It's difficult to move. Please move me somewhere else.

What this problem usually means

The LED blinks red with this voice guide: the device is caught, stuck, or trapped while moving.

Likely causes

  1. Robot is caught, stuck or trapped while moving

How to fix it — step by step

  1. Reset the Jet Bot Combo first (the LED turns white when reset)
  2. Enable Sleep mode and move the Jet Bot Combo to another area

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Samsung Robot vacuum Bespoke Jet Bot Combo problems

See all Samsung Bespoke Jet Bot Combo codes & guides →