Samsung Robot vacuum Bespoke Jet Bot Combo The object recognition sensor needs to be reset. Turn the power off, then on again. If that doesn't fix it, contact Customer Service.
What this problem usually means
Samsung lists this in the reset-then-service group: try resetting the Jet Bot Combo; if the message returns, contact the Support Center for service.
Likely causes
- Object recognition sensor problem
How to fix it — step by step
- Reset the Jet Bot Combo (turn the power off, then on again)
- If that doesn't fix it, contact the Samsung Support Center for service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Samsung Robot vacuum Bespoke Jet Bot Combo problems
- The washing space is full.
- The washing space of the clean station is full, so the station can't wash the robot vacuum's Mop. Empty it.
- The washing space of the clean station is full, so the station can't wash the robot vacuum's Mop. Empty the washing space.
- The wastewater tank of the clean station is full, so the station can't wash the robot vacuum's Mop. Empty it and start again.
- The wastewater tank of the clean station is full, so the station can't wash the robot vacuum's Mop. Empty it.
- There's no clean water tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a clean water tank and start again.
- There's no clean water tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a clean water tank.
- There's no washing plate in the clean station, so the station can't wash the robot vacuum's Mop. Install it properly and start again.
- There's no washing plate in the clean station, so the station can't wash the robot vacuum's Mop. Install the plate properly.
- There's no wastewater tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a wastewater tank and start again.
- There's no wastewater tank in the clean station, so the station can't wash the robot vacuum's Mop. Insert a wastewater tank.
- A leak was detected in the clean station, so the station can't wash the robot vacuum's Mop. If the error persists, contact Customer Service.