Samsung Robot vacuum Bespoke Jet Bot Combo Can't move in this no-go zone. Please move me somewhere else.
What this problem usually means
The Jet Bot Combo is inside a No-go Zone.
Likely causes
- Robot is inside a No-go Zone set in the app
How to fix it — step by step
- Check the No-go Zones in the SmartThings app
- Move the Jet Bot Combo out of the No-go Zone
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Samsung Robot vacuum Bespoke Jet Bot Combo problems
- Can't see anything. Please clean the front with a soft cloth.
- Insert the washing space.
- It's difficult to move. Please move me somewhere else.
- Please attach the wastewater tank.
- Please check the battery connection by turning the power off, then back on. If you hear this message again after that, contact Customer Service.
- Please check the left wheel to see if there's something stuck in it.
- Please check the right wheel to see if there's something stuck in it.
- Please insert the battery. If it's already inserted, then turn the power off and back on again to check the battery connection. If you hear this message again after that, contact Customer Service.
- Please insert the bin so cleaning can start.
- Please remove the brush and take out whatever's stuck in there.
- Something is caught in the left Mop.
- Something is caught in the right Mop.