Rheem Air Conditioner A915_O Error Code
What the A915_O code means
Inverter fault — communication fault, an EcoNet fault code (_O = outdoor unit) displayed on the EcoNet Control Center / Universal Outdoor Control (UODC) of a Rheem variable-speed EcoNet air conditioner/heat pump (A18AZ / P18AZ series, Table 15). Response action: lockout while active, short cycle to restart.
Likely causes
- Communication failure between the outdoor control and the inverter drive
- Loose or damaged harness between the UODC and inverter
- Failed inverter drive or outdoor control
How to fix it — step by step
- Turn off power to the outdoor unit and reseat/check the harness between the outdoor control and inverter
- Have a technician test which board has failed if the fault returns
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Inverter drive board.
Shop the Inverter drive board at RepairClinic or Amazon
Also tied to this fault: Universal Outdoor Control (UODC) board - Shop at RepairClinic or Amazon
Parts that commonly fix the A915_O code
- Inverter drive board - Shop at RepairClinic or Amazon
- Universal Outdoor Control (UODC) board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.