Rheem Air Conditioner A954_O Error Code
What the A954_O code means
Suction temperature thermistor failure, an EcoNet fault code (_O = outdoor unit) displayed on the EcoNet Control Center / Universal Outdoor Control (UODC) of a Rheem variable-speed EcoNet air conditioner/heat pump (A18AZ / P18AZ series, Table 15). With a suction sensor failure, Rheem notes subcooling verification is not available.
Likely causes
- Open, shorted or out-of-range suction temperature thermistor → Shop the suction temperature thermistor at RepairClinic
- Damaged sensor wiring or loose connection
How to fix it — step by step
- Turn off power to the outdoor unit
- Have a technician test the suction thermistor and its wiring and replace the sensor if failed
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Suction temperature thermistor.
Shop the Suction temperature thermistor at RepairClinic or Amazon
Parts that commonly fix the A954_O code
- Suction temperature thermistor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.