Rheem Air Conditioner A001_O Error Code
What the A001_O code means
Model data configuration error, an EcoNet fault code (_O = outdoor unit) displayed on the EcoNet Control Center / Universal Outdoor Control (UODC) of a Rheem variable-speed EcoNet air conditioner/heat pump (A18AZ / P18AZ series, Installation Instructions Table 15). Response action: lockout while active, short cycle to restart.
Likely causes
- Incorrect or corrupt model data in the outdoor control
- Wrong control board or model data not configured for the unit
How to fix it — step by step
- Cycle power to the outdoor unit and check whether the code clears
- Have a technician verify the outdoor control's model data configuration for the exact unit
- Replace or reconfigure the outdoor control if the error persists
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Universal Outdoor Control (UODC) board.
Shop the Universal Outdoor Control (UODC) board at RepairClinic or Amazon
Parts that commonly fix the A001_O code
- Universal Outdoor Control (UODC) board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.