Electrolux Dishwasher Older Er-code models (EIDW / EWDW series) Er-10 Error Code
What the Er-10 code means
Electronic control board relay failure: a relay on the main control board has failed.
Likely causes
- Failed control board relay
- Control board damage from a power surge
- Wiring fault to a board-driven component
How to fix it — step by step
- Turn power off at the breaker for 5 minutes and restart once
- If Er-10 returns, stop the dishwasher
- Do not keep power-cycling it
- Book service to confirm and replace the control board
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the main control board.
Parts that commonly fix the Er-10 code
- main control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the tub edge inside the door. It's the key to the right manual pages and the right parts.
Related Electrolux Dishwasher Older Er-code models (EIDW / EWDW series) error codes
See all Electrolux Older Er-code models (EIDW / EWDW series) codes & guides →