Electrolux Dishwasher Older Er-code models (EIDW / EWDW series) Er-06 Error Code
What the Er-06 code means
Lower fan failure: during the dry cycle the control board does not receive proper speed feedback from the lower fan.
Likely causes
- Failed lower fan motor → Shop the lower fan at RepairClinic
- Lower fan wiring fault
- Control board feedback fault
How to fix it — step by step
- Turn power off at the breaker for 5 minutes and restart
- Run a cycle with a heated dry option and listen for the fan
- If Er-06 returns, stop and book service
- A technician will check the fan wiring and replace the fan if needed
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the lower fan.
Parts that commonly fix the Er-06 code
- lower fan - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the tub edge inside the door. It's the key to the right manual pages and the right parts.
Related Electrolux Dishwasher Older Er-code models (EIDW / EWDW series) error codes
See all Electrolux Older Er-code models (EIDW / EWDW series) codes & guides →