Electrolux Dishwasher Older Er-code models (EIDW / EWDW series) Er-03 Error Code
What the Er-03 code means
Wash motor failure: the circulation (wash) motor is not running correctly, so dishes will not get clean.
Likely causes
- Failed wash motor
- Motor wiring fault
- Control board fault
- Debris jamming the pump
How to fix it — step by step
- Turn power off at the breaker for 5 minutes and restart once
- Clean the filters and check the sump for debris or glass
- If the motor hums or will not run and the code returns, stop the unit
- Book service to test the wash motor → Shop the wash motor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the wash motor.
Parts that commonly fix the Er-03 code
- wash motor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the tub edge inside the door. It's the key to the right manual pages and the right parts.
Related Electrolux Dishwasher Older Er-code models (EIDW / EWDW series) error codes
See all Electrolux Older Er-code models (EIDW / EWDW series) codes & guides →