Electrolux Dishwasher Older Er-code models (EIDW / EWDW series) Er-08 Error Code
What the Er-08 code means
User interface control failure: the control board has verified a tactile or touch switch on the user interface is bad or shorted.
Likely causes
- Shorted touch switch on the interface
- Moisture in the control panel
- Failed user interface control → Shop the user interface control at RepairClinic
How to fix it — step by step
- Wipe the control panel clean and dry
- Turn power off at the breaker for 5 minutes and restart
- Press each control lightly to check none is stuck
- If Er-08 returns, the user interface needs replacing
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the user interface control.
Parts that commonly fix the Er-08 code
- user interface control - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the tub edge inside the door. It's the key to the right manual pages and the right parts.
Related Electrolux Dishwasher Older Er-code models (EIDW / EWDW series) error codes
See all Electrolux Older Er-code models (EIDW / EWDW series) codes & guides →