Ecovacs Robot vacuum Deebot X2 After returning to the Station, DEEBOT does not empty the Dust Bin
What this problem usually means
The robot docks but auto-emptying does not start.
Likely causes
- The Auto-Empty function has not been turned on in the ECOVACS HOME App
- Dust Collection Cabin is not closed
- Dust Bag is not installed in the Station
- Manually moving DEEBOT back to the Station might not trigger the Auto-Empty function
- DEEBOT does not do cleaning/emptying in Video Manager mode (normal)
- Do Not Disturb mode is enabled
How to fix it — step by step
- Turn on the Auto-Empty function in the ECOVACS HOME App
- Close the Dust Collection Cabin
- Install the Dust Bag and close the Dust Collection Cabin → Shop the dust bag at Amazon
- Let DEEBOT return to the Station on its own; do not manually move it
- Turn off Do Not Disturb mode in the ECOVACS HOME App or manually start dust-emptying
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Dust Bag.
Parts that commonly fix it
- Dust Bag - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot X2 problems
- AIVI Camera cannot recognize objects
- DEEBOT does not respond to the Station instruction
- DEEBOT gets stuck while working and stops
- DEEBOT is not able to connect to ECOVACS HOME App
- DEEBOT is unable to charge
- DEEBOT returns to the Station before it has finished cleaning
- DEEBOT Side Brush drops out of place during use
- Delay in remote control
- Disordered cleaning route, deviation from the cleaning route, repeated cleaning, or missing of small areas
- Driving wheels are blocked
- Dust leakage occurs during working
- Fail to empty the Dust Bin