Ecovacs Robot vacuum Deebot X2 Dust leakage occurs during working
What this problem usually means
Dust leaks while the robot or station is working.
Likely causes
- The outlet of the Dust Bin is blocked by foreign objects
How to fix it — step by step
- Remove the Dust Bin and clean the foreign objects on the outlet
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot X2 problems
- Fail to empty the Dust Bin
- Mopping Pad Plate cannot rotate
- No signal found. Unable to return to the Station
- Running is very loud during cleaning
- The map is lost
- Unable to create furniture map on App
- Video Manager cannot open or has no screen
- Voice prompt: the Cleaning Sink is full
- After returning to the Station, DEEBOT does not empty the Dust Bin
- AIVI Camera cannot recognize objects
- DEEBOT does not respond to the Station instruction
- DEEBOT gets stuck while working and stops