Ecovacs Robot vacuum Deebot X2 Driving wheels are blocked
What this problem usually means
One or both driving wheels cannot turn.
Likely causes
- Driving wheels are blocked by foreign objects
How to fix it — step by step
- Rotate and press the driving wheels to check for any foreign object wrapped or stuck, and clean it in time
- If the problem persists, contact ECOVACS Customer Care for help
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot X2 problems
- Dust leakage occurs during working
- Fail to empty the Dust Bin
- Mopping Pad Plate cannot rotate
- No signal found. Unable to return to the Station
- Running is very loud during cleaning
- The map is lost
- Unable to create furniture map on App
- Video Manager cannot open or has no screen
- Voice prompt: the Cleaning Sink is full
- After returning to the Station, DEEBOT does not empty the Dust Bin
- AIVI Camera cannot recognize objects
- DEEBOT does not respond to the Station instruction