Dreame Robot vacuum Dreame W10 The robot gets into trouble while working and stops

What this problem usually means

The robot stops working mid-task and shuts down.

Likely causes

  1. The battery is depleted to 0% and the robot automatically powers off
  2. The robot failed to charge, so its battery ran out (base not connected to power, or poor contact between robot and base)

How to fix it — step by step

  1. Check that the base is connected to the power supply
  2. Check the contact between the robot and the base and clean the charging contacts
  3. If the problem persists, contact after-sales service

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Dreame Robot vacuum Dreame W10 problems

See all Dreame Dreame W10 codes & guides →