Coway Air purifier Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 12 problems covered.
Shop Coway Air purifier parts at Amazon
All Air purifier codes across brands →
Finding your model number: it is on the unit's rating plate.
Airmega 250
All Coway Airmega 250 codes & guides → (1 covered)
- Filter reset indicator (orange) — The Airmega 250 filter reset indicator stays on during the filter cleaning/replacement cycle, and when the cleaning cycle or filter life…
AP-1512HH
All Coway AP-1512HH codes & guides → (8 covered)
- Air quality sensor cleaning — Documented maintenance guide: clean the air quality sensor every 2 months - without regular cleaning, the performance of the air quality…
- Airflow speed does not change — The airflow speed does not change, per the AP-1512HH troubleshooting table.
- Airflow speed is significantly weaker than before — The airflow speed is significantly weaker than before, per the AP-1512HH troubleshooting table.
- Bad smell comes out of the air outlet — A bad smell comes out of the air outlet, per the AP-1512HH troubleshooting table.
- HEPA LED (filter replacement indicator) — The filter replacement reset indicator blinks when a filter needs to be replaced; the HEPA LED identifies the True HEPA filter, which is…
- No air is blowing — No air is blowing, per the AP-1512HH troubleshooting table. The product specification also notes the fan motor shuts down when the front…
- Odor LED (filter replacement indicator) — The filter replacement reset indicator blinks when a filter needs to be replaced; the Odor LED identifies the deodorization filter, which…
- Pollution level indicator always stays the same — The color of the pollution level indicator always stays the same, per the AP-1512HH troubleshooting table.
AP-1512HHS (AP-1519P)
All Coway AP-1512HHS (AP-1519P) codes & guides → (3 covered)
- Forcible filter reset mode — Documented reset procedure for when a filter was replaced or cleaned before its replacement cycle was reached - it resets the filter cycle…
- Max2 LED (filter replacement indicator) — The filter replacement reset indicator blinks when a filter needs to be replaced; the Max2 LED identifies the Max2 filter (activated carbon…
- Pre LED (filter replacement indicator) — The filter replacement reset indicator blinks when a filter needs attention; the Pre LED identifies the pre-filter, which is cleaned every…