Coway Air purifier AP-1512HHS (AP-1519P) Forcible filter reset mode
What this problem usually means
Documented reset procedure for when a filter was replaced or cleaned before its replacement cycle was reached - it resets the filter cycle counter back to the factory default setting. In this manual the selectable filters are the pre-filter (press once) and the Max2 filter (press twice), or both together (press three times).
Likely causes
- Filter replaced or cleaned early, before the filter replacement indicator activated
How to fix it — step by step
- When the filter reset indicator is not activated, press and hold the Reset button for 2 seconds to enter forcible reset mode
- Press the Reset button to select the filter to reset: press once for the pre-filter, twice for the Max2 filter, three times for pre-filter & Max2 filter together → Shop the max2 filter (activated carbon + true hepa) at Amazon → Shop the pre-filter at Amazon
- After selecting, press and hold the Reset button for 2 seconds - the accumulated time in the electronic time counter is erased
- Note: if there is no input for 5 seconds in forcible reset mode, the mode is cancelled
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the pre-filter.
Also tied to this fault: Max2 filter (activated carbon + True HEPA) - Shop at Amazon
Parts that commonly fix it
- pre-filter - Shop at Amazon
- Max2 filter (activated carbon + True HEPA) - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.