Coway Air purifier AP-1512HH Air quality sensor cleaning

What this problem usually means

Documented maintenance guide: clean the air quality sensor every 2 months - without regular cleaning, the performance of the air quality sensor deteriorates, and in a dusty environment it should be cleaned more often.

Likely causes

  1. Dust build-up on the air quality sensor, its lens, dust inlet and dust outlet

How to fix it — step by step

  1. Unplug the air purifier before cleaning
  2. Open the air quality sensor cover on the right-hand side of the product
  3. Clean the air inlet and outlet vent and then the air quality sensor with a soft brush or vacuum cleaner
  4. Wet a cotton swab lightly and clean the lens, dust inlet and dust outlet, then clean them with a dry cotton swab to remove remaining moisture

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Coway Air purifier AP-1512HH problems

See all Coway AP-1512HH codes & guides →