Coway Air purifier AP-1512HH HEPA LED (filter replacement indicator)
What this problem usually means
The filter replacement reset indicator blinks when a filter needs to be replaced; the HEPA LED identifies the True HEPA filter, which is replaced every 1 year.
Likely causes
- True HEPA filter has reached its replacement cycle (every 1 year, based on 8-hour use at maximum speed)
How to fix it — step by step
- Unplug the air purifier before replacing filters
- Open the front cover, remove the True HEPA filter and fit a new original Coway filter, checking the 'front' side is in the correct direction (filter order: pre-filter, deodorization filter, True HEPA filter) → Shop the true hepa filter at Amazon
- After replacing the filter, push the Reset button for 2 seconds to reset the indicator - note the pollution level indicator will not turn on while the filter replacement indicator is activated
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the True HEPA filter.
Parts that commonly fix it
- True HEPA filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.