Coway Air purifier AP-1512HHS (AP-1519P) Pre LED (filter replacement indicator)
What this problem usually means
The filter replacement reset indicator blinks when a filter needs attention; the Pre LED identifies the pre-filter, which is cleaned every 2-4 weeks.
Likely causes
- Pre-filter has reached its cleaning cycle (every 2-4 weeks)
How to fix it — step by step
- Pull the upper part of the front cover to reveal the pre-filter, press down on its top clip and pull it out - remove it carefully without a shock so dust does not fall off → Shop the pre-filter at Amazon
- Clean the pre-filter with a vacuum cleaner or with water depending on contamination, and install it only after removing the moisture completely, fitting it correctly in the hook and refitting the front cover
- After cleaning, hold the Reset button for 2 seconds to reset the indicator - note the pollution level indicator will not turn on while the filter replacement indicator is activated
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the pre-filter.
Parts that commonly fix it
- pre-filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.