Carrier Air Conditioner 55 Error Code
What the 55 code means
Outdoor coil sensor fault, read as short/long flashes of the amber LED on the outdoor unit control board of a Carrier Infinity 24ANA two-stage air conditioner. The outdoor coil temperature sensor is not reading or is out of range.
Likely causes
- Open or shorted outdoor coil temperature sensor (thermistor) → Shop the outdoor coil temperature sensor (thermistor) at RepairClinic
- Damaged sensor wiring or loose connection at the outdoor control board
- Sensor displaced from the outdoor coil
How to fix it — step by step
- Turn off power to the outdoor unit
- Inspect the coil sensor position on the outdoor coil and its wiring
- Have a technician ohm out the sensor and replace it if out of range
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Outdoor coil temperature sensor (thermistor).
Shop the Outdoor coil temperature sensor (thermistor) at RepairClinic or Amazon
Parts that commonly fix the 55 code
- Outdoor coil temperature sensor (thermistor) - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Carrier manual is on Carrier's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.