Carrier Air Conditioner 74 Error Code
What the 74 code means
No 230V at the compressor, read as short/long flashes of the amber LED on the outdoor unit control board of a Carrier Infinity 24ANA1 air conditioner. Compressor voltage is not sensed when the compressor should be starting.
Likely causes
- Contactor stuck open or failed contactor coil
- Wiring error or loose high-voltage connection to the compressor
How to fix it — step by step
- Turn off power to the outdoor unit
- Have a technician check contactor operation and the high-voltage wiring to the compressor → Shop the compressor contactor at RepairClinic
- Replace the contactor if it does not close on a call
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Compressor contactor.
Parts that commonly fix the 74 code
- Compressor contactor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Carrier manual is on Carrier's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.