Carrier Air Conditioner 72 Error Code

What the 72 code means

High-stage thermal cutout, read as short/long flashes of the amber LED on the outdoor unit control board of a Carrier Infinity 24ANA two-stage air conditioner. Compressor operation was detected and then disappeared while a high-stage demand existed.

Likely causes

  1. Internal compressor overload trip
  2. Start relay and capacitor held in circuit too long (if installed)
  3. High discharge pressure or overheating compressor

How to fix it — step by step

  1. Turn the system off and allow the compressor to cool → Shop the compressor at RepairClinic
  2. Check that the outdoor coil is clean and the outdoor fan runs
  3. Have a technician check refrigerant pressures, the start relay/capacitor and compressor operation if the code repeats → Shop the run/start capacitor at RepairClinic → Shop the start relay at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the 72 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Carrier manual is on Carrier's support site — you'll need your model number.

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Carrier Air Conditioner error codes

See all Carrier Air Conditioner codes & guides →