Whirlpool Oven Older 2-digit-code models F6 Error Code

What the F6 code means

On older code charts F6 is a problem in the time-keeping circuit of the electronic control. On newer tech sheets the F6 family is different - F6 E0 is a return-line / board communication fault and F6 E1 is over-temperature - so the E-digit and model matter.

Likely causes

  1. Time-keeping circuit fault in the electronic control
  2. Poor electrical ground to the range
  3. Failed control board → Shop the control board at RepairClinic

How to fix it — step by step

  1. Reset the clock / time of day and try a cooking cycle again
  2. Switch the breaker off for 1 minute and restore power
  3. If F6 returns, schedule service for the control

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F6 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Whirlpool Oven Older 2-digit-code models error codes

See all Whirlpool Older 2-digit-code models codes & guides →