Whirlpool Older 2-digit-code models Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 9 codes covered.
Shop Whirlpool Older 2-digit-code models parts at RepairClinic or Amazon
- F0 — Control board failure on older 2-digit-code ranges and wall ovens: the electronic oven control (clock) has failed its own checks.
- F1 — Control board failure on older 2-digit-code ovens; on some models a shorted keypad produces the same code. Newer ovens show this family as…
- F2 — Oven temperature too high: the control saw a temperature above its limit in Bake or in Clean. The newer equivalent is F3 E2 / F3 E3.
- F3 — Open oven temperature sensor circuit on older 2-digit-code ovens. On newer ovens the same fault is F3 E0.
- F4 — Shorted oven temperature sensor on older 2-digit-code ovens - the same sensor as F3 with the opposite failure. On newer ovens this is F3 E1.
- F5 — On older 2-digit-code ovens PartSelect lists F5 as a control board failure (the control's self-check / watchdog circuits disagree). Do not…
- F6 — On older code charts F6 is a problem in the time-keeping circuit of the electronic control. On newer tech sheets the F6 family is different…
- F7 — A function key is stuck or shorted on the keypad, on older 2-digit-code ovens. The newer equivalents are F2 E0 and F7 E1.
- F8 — Control board failure on older 2-digit-code ovens. Note: on some newer Whirlpool tech sheets F8 E-codes instead describe cooling fan speed…