Whirlpool Oven Older 2-digit-code models F2 Error Code
What the F2 code means
Oven temperature too high: the control saw a temperature above its limit in Bake or in Clean. The newer equivalent is F3 E2 / F3 E3.
Likely causes
- Welded bake or broil relay contacts on the control board → Shop the control board at RepairClinic
- Drifted or high-resistance oven temperature sensor → Shop the oven temperature sensor at RepairClinic
- Door lock problem on self-clean models letting clean temperatures run away
How to fix it — step by step
- Press Cancel and let the oven cool completely - do not run self-clean until this is fixed
- Switch the breaker off for 1 minute, restore it, and try a low Bake setting
- If F2 returns, switch the oven off at the breaker and schedule service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the control board.
Shop the control board at RepairClinic or Amazon
Also tied to this fault: oven temperature sensor - Shop at RepairClinic or Amazon
Parts that commonly fix the F2 code
- control board - Shop at RepairClinic or Amazon
- oven temperature sensor - Shop at RepairClinic or Amazon
Before you buy: check the oven temperature sensor first
Test: Unplug the range and measure the oven temperature sensor's resistance at the sensor connector or the control check points in the tech sheet.
A good one reads: 1080 Ω at 21°C / 70°F, rising to 1654 Ω at 177°C / 350°F — add about 2 Ω per 1°F above room temperature (Whirlpool tech sheet 8303103 / W10201489A). If the resistance is not valid, replace the sensor.
Test values from forum.appliancepartspros.com documentation - confirm against your model's own tech sheet.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.
Related Whirlpool Oven Older 2-digit-code models error codes
See all Whirlpool Older 2-digit-code models codes & guides →