Whirlpool Oven Older 2-digit-code models F3 Error Code

What the F3 code means

Open oven temperature sensor circuit on older 2-digit-code ovens. On newer ovens the same fault is F3 E0.

Likely causes

  1. Failed oven temperature sensor (RTD) - a good one reads about 1,080 ohms at room temperature → Shop the oven temperature sensor at RepairClinic
  2. Corroded sensor connector behind the back panel
  3. Pinched or broken sensor harness

How to fix it — step by step

  1. Switch the breaker off for 1 minute, restore it, and try Bake
  2. Note whether preheat was slow or uneven before the code - a classic sensor warning sign
  3. If F3 returns, schedule service to test and replace the sensor

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F3 code

Before you buy: check the oven temperature sensor first

Test: Unplug the range and measure the oven temperature sensor's resistance at the sensor connector or the control check points in the tech sheet.

A good one reads: 1080 Ω at 21°C / 70°F, rising to 1654 Ω at 177°C / 350°F — add about 2 Ω per 1°F above room temperature (Whirlpool tech sheet 8303103 / W10201489A). If the resistance is not valid, replace the sensor.

Test values from forum.appliancepartspros.com documentation - confirm against your model's own tech sheet.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Whirlpool Oven Older 2-digit-code models error codes

See all Whirlpool Older 2-digit-code models codes & guides →