Whirlpool Dishwasher Older HE models (c. 2010-2020 platform) F9 E2 Error Code
What the F9 E2 code means
The control senses the diverter motor has constant power (a shorted diverter relay).
Likely causes
- Shorted diverter relay on the main control board (older platform) → Shop the main control board at RepairClinic
- Defective diverter motor / valve → Shop the diverter motor at RepairClinic
- Drain motor fault or a blocked drain path (current platform)
How to fix it — step by step
- Cut power for 1 minute, restore it, and run a cycle
- Clean the filter and check the drain hose and disposer for clogs
- If the code returns, schedule service - the control or motor usually needs replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the main control board.
Shop the main control board at RepairClinic or Amazon
Also tied to this fault: diverter motor - Shop at RepairClinic or Amazon; drain pump - Shop at RepairClinic or Amazon
Parts that commonly fix the F9 E2 code
- main control board - Shop at RepairClinic or Amazon
- diverter motor - Shop at RepairClinic or Amazon
- drain pump - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number on the tub edge inside the door. It's the key to the right manual pages and the right parts.
Related Whirlpool Dishwasher Older HE models (c. 2010-2020 platform) error codes
See all Whirlpool Older HE models (c. 2010-2020 platform) codes & guides →