Whirlpool Dishwasher Older HE models (c. 2010-2020 platform) F7 E2 Error Code

What the F7 E2 code means

Heater fault: the heating element stays on, or the water temperature reached about 80C with the element energised.

Likely causes

  1. Wash motor failure (current platform) → Shop the wash motor at RepairClinic
  2. Shorted heater relay on the main control board (older platform) → Shop the main control board at RepairClinic
  3. Defective thermistor

How to fix it — step by step

  1. Power-cycle the dishwasher: unplug or breaker off for 30 seconds, then restore power
  2. Run a cycle and watch whether the code returns
  3. If it returns, schedule service as Whirlpool directs for this code

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F7 E2 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number on the tub edge inside the door. It's the key to the right manual pages and the right parts.

Related Whirlpool Dishwasher Older HE models (c. 2010-2020 platform) error codes

See all Whirlpool Older HE models (c. 2010-2020 platform) codes & guides →