Subaru Sedan Legacy Oxygen sensor failure
What this problem usually means
The oxygen sensors in 2000 to 2006 Legacy models have a tendency to crack and fail, illuminating the check engine light. Without a working sensor the engine can suffer poor fuel efficiency, misfires, and poor acceleration, and misfires can damage the engine further.
Likely causes
- cracked oxygen sensor
How to fix it — step by step
- Have the fault codes read to confirm the oxygen sensor is the cause → Shop the oxygen sensor at Amazon
- Note any misfires, poor acceleration, or worsening fuel economy
- Avoid prolonged driving with an active misfire, which can damage the engine and catalyst
- Have the failed oxygen sensor replaced and the codes cleared
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the oxygen sensor.
Parts that commonly fix it
- oxygen sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.