Subaru Sedan Legacy Head gasket failure
What this problem usually means
Second-generation Legacy models have a tendency for head gasket failures, reported to be caused by coolant becoming pressurized and bursting the gasket. The failure can leak oil and coolant and lead to overheating, so the car should go to a mechanic immediately.
Likely causes
- pressurized coolant bursting the head gasket
How to fix it — step by step
- Stop driving and let the engine cool if the temperature gauge climbs, and do not open a hot cooling system
- Check coolant and oil levels once cool and look for leaks
- Note any overheating, white smoke, or sweet coolant smell
- Have a shop pressure-test the system and replace the head gasket → Shop the head gasket at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the head gasket.
Parts that commonly fix it
- head gasket - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.