Subaru Sedan Legacy Excessive oil consumption

What this problem usually means

Excessive engine oil consumption is the most reported Legacy problem, with owners refilling a pint or two of oil every 2,000 to 5,000 miles and the 2013 model the most susceptible. If the oil level falls too far the engine can overheat, knock, and wear faster toward expensive damage.

Likely causes

  1. engine consuming oil between services

How to fix it — step by step

  1. Check the oil level regularly and top up before it reaches the low mark
  2. Keep spare oil in the car if the low oil light has come on before
  3. Record oil added against mileage to show the rate to a shop
  4. Have a shop run an oil consumption test and inspect the engine if use stays high

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Subaru Sedan Legacy problems

See all Subaru Legacy codes & guides →