Subaru Sedan Legacy Headlights burning out

What this problem usually means

Many owners of the 2011 Legacy report headlight bulbs burning out every six months, some as often as after three weeks, far sooner than bulbs normally last. One theory is that the electrical system sends too much voltage to the lights and fries the bulb filaments, and access is awkward because the wheel and fender often need removal.

Likely causes

  1. excess voltage frying bulb filaments

How to fix it — step by step

  1. Check both headlights regularly, especially before night driving
  2. Replace a failed bulb promptly; a replacement bulb is inexpensive
  3. Note how quickly bulbs fail and whether both sides are affected
  4. Have a shop check the charging voltage and replace bulbs that are hard to access if failures keep repeating

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Subaru Sedan Legacy problems

See all Subaru Legacy codes & guides →