Rheem Furnace Seven-segment display — R801V 74 Error Code
What the 74 code means
Gas inlet pressure switch open on Rheem R801V furnaces with the 7-segment diagnostic display. Inlet gas pressure is too low or the switch has opened.
Likely causes
- low incoming gas pressure
- closed or partly closed gas valve → Shop the gas valve at RepairClinic
- faulty gas inlet pressure switch → Shop the pressure switch at RepairClinic
How to fix it — step by step
- Confirm the manual gas shutoff near the furnace is fully open
- Check other gas appliances are working normally
- Do not adjust gas piping or pressure yourself
- Call a licensed HVAC technician or your gas utility if pressure is low
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the gas valve.
Shop the gas valve at RepairClinic or Amazon
Also tied to this fault: pressure switch - Shop at RepairClinic or Amazon
Parts that commonly fix the 74 code
- gas valve - Shop at RepairClinic or Amazon
- pressure switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.
Related Rheem Furnace Seven-segment display — R801V error codes
See all Rheem Seven-segment display — R801V codes & guides →