Kenmore Dryer F:20 Error Code

What the F:20 code means

Heater relay failure on Kenmore Elite dryers (110-series Whirlpool-built platform): the heating circuit is not being controlled correctly, so the dryer may not heat.

Likely causes

  1. Failed heater relay on the control board
  2. Heating element or gas heating circuit fault
  3. Loose heating circuit wiring

How to fix it — step by step

  1. Unplug the dryer, restore power and try a heated cycle once
  2. Check airflow and clean the lint screen and vent, as overheating can stress the heat circuit
  3. Call a technician if F:20 returns or there is no heat, as the relay, board or heating components need testing

Parts that commonly fix the F:20 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore dryer error codes

See all Kenmore dryer codes & guides →