Kenmore Dryer d90 Error Code

What the d90 code means

Exhaust vent about 90% blocked on Kenmore 796-series (LG-built) dryers: the ductwork is severely restricted, drying will be slow and the dryer runs hot. Do not keep using the dryer until the vent is cleaned.

Likely causes

  1. Heavy lint blockage in the ductwork
  2. Crushed or kinked vent
  3. Blocked outside vent hood
  4. Vent run too long or with too many turns

How to fix it — step by step

  1. Stop using the dryer until the vent is checked
  2. Clean the lint screen and the entire vent run
  3. Straighten or replace any crushed vent section and clear the outside hood
  4. Run a test cycle and confirm strong airflow outside before normal use

Parts that commonly fix the d90 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore dryer error codes

See all Kenmore dryer codes & guides →